MC-7650 / MC-7630 / MC-7610
9.12. Motor
Removing:
1. Remove the motor from the noise suppressor and motor
support rubbers (front/rear) and capacitor. (Fig.21)
Assembling:
1. Install the motor support rubbers (front/rear) and capacitor
on the motor. (Fig.21)
2. Make wiring connections according to the wiring diagram.
(Refer to P.3.)
3. Fit the noise suppressor into the motor, and fit the motor,
body partition, and cord reel ass´y into the upper body.
22
Fig.21