Related Manuals for Plymovent MONOGO
Summary of Contents for Plymovent MONOGO
- Page 1 Stationary welding fume extractor with flexible arm MONOGO | MONOGO PLUS Installation and user manual www.plymovent.com...
-
Page 2: Table Of Contents
This publication has been written with great care. However, the manufacturer cannot be held responsible, either for any errors occurring in this publication or for their consequences. 0000111691/011121/B MonoGo... -
Page 3: Preface
The following pictograms and symbols are used in this manual: General description The MonoGo is a stationary filter unit with an integrated fan Suggestions and recommendations to simplify and an extraction arm. It features a pre filter cassette and a carrying out tasks and actions. -
Page 4: Product Description
2.2.1 Indication of filter replacement with care. The MonoGo has a service indicator that monitors the airflow. - Completely dismount the extraction arm before transport. It gives an acoustic signal to replace the filter(s). Dismount the arm by executing the mounting procedure in reverse order. - Page 5 Thus avoid apply). connection between the workpiece and the MonoGo, so that - Do not install the product in front of entrances and exits there is no possibility of the welding current flowing back to which must be used for emergency services.
-
Page 6: Installation
Extraction arm Arm on stationary unit To install the extraction arm, do the following. In case of MonoGo: hose tube arm - extraction arm (pre-assembled; excl. hose tube) - hose tube Do a balance check of the arm before you fasten the - hose clamp (2) hoses. -
Page 7: Use
Fasten the hose tube with a hose clamp (B). Refer to chapter 3 / Safety instructions / Use. Control panel The MonoGo has a separate switch box to put the unit on and off. Controls and indicators: Fig. 5.1 Buzzer (service indicator) -
Page 8: Maintenance
Check for cracks or damages. Fig. 6.1 Replacement of the pre filter cassette hoses Replace if necessary Hood Check the movement of the hood. If necessary, adjust the friction; refer to paragraph Fig. VI The arrow indicates the airflow direction 0000111691/011121/B MonoGo... -
Page 9: Troubleshooting
Replace the HEPA 6.3.1 Hose tube arm (Economy Arm) filter cassette as well • Determine which joint needs more or less friction. The arrow indicates the airflow direction. An incorrectly placed pre filter cassette affects the filter lifetime. 0000111691/011121/B MonoGo... -
Page 10: Spare Parts
The pre filter is Replace the pre CE declaration of conformity for machinery emits an extraction clogged filter cassette We, Plymovent Manufacturing B.V., Koraalstraat 9, acoustic capacity The HEPA filter Replace the HEPA 1812 RK Alkmaar, Netherlands, herewith declare, on signal... - Page 11 Fig. I Dimensions Fig. III Recommended installation height (E) + hole pattern 2100-3100 Fig. II Working range Fig. IV Positioning of the extraction arm EA-2/H KUA-160/2H EA-3/H KUA-160/3H EA-4/H KUA-160/4H A = max. 480 mm B = >480 mm 0000111691/011121/B MonoGo...
- Page 12 ANNEX Fig. V Reset button 0000111691/011121/B MonoGo...
- Page 13 ANNEX Fig. VI Adjustment of the extraction arm | Adjustment points D (2x) E (2x) D (2x) 0000111691/011121/B MonoGo...
- Page 14 ANNEX Fig. VII Exploded view MonoGo | MonoGo plus 0000117141 0000117135 0000117136 0000100583 0000117142 0000117904 (2x) 0000111637 0000111628 0000111636 2019 0000117114 0000117117 0000117128 0000117121 0000300902 0000117118 0000117129 0000111691/011121/B MonoGo...
- Page 15 ANNEX Spare parts MonoGo | MonoGo plus Article no. Description General 0000111637 Pre filter cassette 1 m² 0000117141 Sealing L=1,9 m for door GoLine 0000117904 Draw latch GoLine (set of 2) 0000300902 Digital pressure switch 100-240 VAC MonoGo (115V/1ph/50Hz) 0000100583...
- Page 16 ANNEX Fig. VIII Exploded view hose tube arm (Economy Arm) 0000101944 0000101537 0000101917 0000101918 0000101919 0000101903 0000102989 0000101395 0000101912 0000101912 (2x) 0000101908 0000102409 0000101550 0000101911 0000101937 0000111691/011121/B MonoGo...
- Page 17 Connection flange with grid 0000102409 Rotating flange (ball bearing) 0000102989 Rubber collar Ø 160 mm Economy Arm 2/H 0000101917 Hose L=2500 mm/Ø 163 mm, incl. 2 hose clamps Economy Arm 3/H 0000101919 Hose L=3500 mm/Ø 163 mm, incl. 2 hose clamps 0000111691/011121/B MonoGo...
- Page 18 Exploded view metal tube arm (KUA-160) 0000101944 0000101537 0000102409 0000102989 0000101907 0000101395 0000101916 0000101903 0000102199 0000102396 0000102398 0000102400 0000102384 0000102387 0000102385 0000102388 0000102386 0000102389 0000101904 0000101905 0000101913 0000101914 0000102397 0000102399 0000102401 0000101912 (2x) 0000102960 0000101906 0000101915 0000101911 0000101908 0000101550 0000114072 0000101937 0000102525 0000111691/011121/B MonoGo...
- Page 19 Hose L=1000 mm/Ø 163 mm, incl. 2 hose clamps 0000102385 Inner frame KUA-160/3H, complete 0000102398 Inner tube KUA-160/3 0000102399 Outer tube KUA-160/3 KUA-160/4H 0000101905 Hose L=1000 mm/Ø 163 mm, incl. 2 hose clamps 0000102386 Inner frame KUA-160/4H, complete 0000102400 Inner tube KUA-160/4 0000102401 Outer tube KUA-160/4 0000111691/011121/B MonoGo...
- Page 20 0000111691/011121/B MonoGo www.plymovent.com...
Need help?
Do you have a question about the MONOGO and is the answer not in the manual?
Questions and answers