Table of Contents
Advertisement
Using the product recovery CD-ROMs
8
Press any key to restart your computer.
!
Please note that this option will delete all existing data both on the C: and D: drives before starting the recovery.
Aborting the recovery process
The recovery process always warns you when the decision you are asked to take cannot be undone.
Whenever possible, the recovery screens allow you either to go back to the previous screen, or to abort the
recovery process.
Performing an application recovery
The application recovery utility allows you to reinstall individual applications. Reinstalling a program can fix
the problems encountered if it does not correctly run anymore.
To perform an application recovery, proceed as follows:
1
Take the final product recovery CD-ROM.
2
Turn on your computer (using AC power only) and wait until Windows has booted up.
3
Insert the product recovery CD-ROM into the upper disc drive.
4
Open the drive through My Computer and click the Apps directory.
5
Open the directory that corresponds to the application you want to recover.
6
Double-click the Setup program.
7
Follow the instructions in the Installer.
✍
You must run the final product recovery CD-ROM from Windows.
The application does not run from DOS.
When performing an application recovery, you do not lose data on your hard disk.
In most cases, it is advised to uninstall an application before reinstalling it.
n N
91
Advertisement
Table of Contents
