Table of Contents
Advertisement
Using Video software
3
Press Play to start the video.
The video begins to play in the Monitor window.
4
Click Mark to mark the beginning of the first segment.
The first frame of the segment to be captured, is displayed in the In/
Out list window.
Click Mark again to mark the end of the segment to capture.
The last frame of the segment to be captured, is displayed in the In/
Out list window.
Continue to mark as many segments as you want.
5
Click Capture to import the selected video segment or click Capture
All to import them all at once.
The Save as a file window appears.
6
Select the location to save the file.
7
Click the Save button.
DVgate captures the segments.
The Capturing complete message appears.
8
Click OK in the DVgate Motion window to finish.
Information about the capturing process is displayed in the Report window.
9
Click OK.
10
Exit DVgate Motion.
The DVmotion2 window appears on the screen.
You can then save the In/Out list, which allows you to capture the same video sequences later on, or
change the In/Out settings.
✍
Make sure that the camera is in Video Tape Recorder mode (VTR) when capturing or playing back video from or to a tape.
If you want to manually import video onto your computer, refer to the DVgate online help file.
n N
21
Advertisement
Table of Contents
