Table of Contents
Advertisement
Using Video software
Recording on the DV device
You can automatically or manually export videos from your computer to a DV device.
To automatically export videos from your computer to a DV device, proceed as follows:
1
Connect the camera to the computer with the i.LINK™ cable and turn on the camera.
2
Launch DVgate Motion.
3
Click the down arrow and select Export-Auto from the Mode drop-down list.
4
Click Record or Record All.
The Output dialog box appears.
5
Select the Add blank image option button.
❑
You can add blank frame(s) during recording if you select the Append option button in the Output
dialog box.
Blank frame(s) can be placed in the following locations:
Head: A blank image is placed before the start of the video sequence during recording.
Tail: A blank image is placed after the end of the video sequence during recording.
Both: Blank images are placed before the start and after the end of the video sequence during
recording.
❑
You can specify the length of a blank image by entering the number of frames in the Length box in
the Output dialog box.
6
Click OK.
The Output dialog box closes and recording starts.
Video sequences are recorded on the DV device in the order in which they are arranged in the Record
List.
★
Clicking Record All will send all the video files shown in the Record List to the connected device. Clicking Record will send only the video files
selected from the Record List to the connected device.
n N
25
Advertisement
Table of Contents
