Table of Contents
Advertisement
Using Video software
Saving the edited video
To save an edited video sequence, proceed as follows:
1
Click the Output or the Output All button.
The Save As dialog box appears.
Information on the output file and the amount of free disk space is shown in the lower part of the Save
As dialog box.
2
Select the location where you want to save the file and type the name of the file in the File name text
box.
3
Click Save.
The Outputting as an AVI file dialog box appears and splicing begins.
The DVassemble window appears and displays the Exporting/Save to an AVI file complete message.
The set time and the size that the file is split into are displayed when outputting an AVI file.
4
Click OK.
The edited video is saved.
✍
When you click the Output button, only the files on the Assemble List that have been selected, are connected and output as a file. Clicking Output
All means that all the files on the Assemble List are connected and output.
The file name is the name that was entered in the Save As dialog box. A 4-digit serial number is attached to the file name, e.g., test001-0001.avi,
then test001-0002.avi, test001-0003.avi.
n N
33
Advertisement
Table of Contents
