Advertisement
Plug-in hybrid operation
266
Charging the high-voltage battery when
stationary
The internal combustion engine and the electric
motor are switched off.
The arrows for the energy flow are not shown.
Further information on charging the high-volt-
age battery via:
a mains socket (
R
a charging station (
R
a wallbox (
page 188)
R
Y
Displaying the total range and electrical
range
The approximate range is based on the current
driving style.
Press the = or ; button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the approximate
X
total range and electrical range.
page 185)
Y
page 189)
Y
Trip
Trip
menu.
Displaying fuel consumption and gen-
erated electrical energy
Fuel consumption
:
Electrical energy generated
;
Every bar of the graph displays the average
value for one minute.
Fuel consumption indicator : may differ from
the indicator in the
From start
From
the
Trip
Trip
menu.
To reset values: the values are reset
start
start
along with the trip computer
(
page 284).
Y
To select
Consumption: turn and press the
Consumption
X
controller.
The display of the multimedia system shows
fuel consumption : and electrical energy
generated ; for the past 15 minutes of driv-
ing.
Starting the vehicle
The vehicle starts in electric mode without the
internal combustion engine (noiseless start).
The internal combustion engine starts only after
the power demanded by the driver exceeds the
available power that the electric motor can cur-
rently provide.
Noiseless start operation is dependent on the
outside temperature and the operating temper-
ature of the internal combustion engine. If not all
conditions for noiseless start operation are ful-
filled, the vehicle starts with the internal com-
bustion engine.
start
trip computer in
From
From
Advertisement
