Download Print this page

Mercedes-Benz GLE 2015 Owner's Manual page 144

Advertisement

Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp in the
¿ or Á button
flashes three times or
remains off. The cooling
with air dehumidification
function cannot be acti-
vated.
Setting climate control to automatic
mode
General notes
In automatic mode, the set temperature is main-
tained automatically at a constant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
The "Cooling with air dehumidification" function
is activated automatically in automatic mode.
In the rear compartment, you can also switch
climate control for the rear seats to automatic
mode using the à button.
Automatic control
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Set the desired temperature.
X
To activate: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow are
activated.
To switch to manual mode: press the _
X
button.
or
Press the I or K button.
X
The indicator lamp in the à button goes
out.
THERMOTRONIC automatic climate control:
when automatic mode is activated, you can
select a climate mode (
Operating the climate control system
Possible causes/consequences and M M Solutions
The cooling with air dehumidification function has been deactivated
due to a malfunction.
Consult a qualified specialist workshop.
X
page 141).
Y
Setting the climate mode
In automatic mode you can select the following
climate modes:
FOCUS
high airflow, slightly cooler setting
MEDIUM medium airflow, standard setting
DIFFUSE low airflow, slightly warmer and
draught-free setting
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
Press the à button.
X
Press the ñ button repeatedly until the
X
desired climate mode appears in the display.
Setting the temperature
THERMATIC automatic climate control
Different temperatures can be set for the driv-
er's and front-passenger sides.
Turn the key to position 2 in the ignition lock
X
(
page 158).
Y
To increase or decrease: turn control : or
X
B anti-clockwise or clockwise (
Only change the temperature setting in small
increments. Start at 22 †.
141
page 136).
Y

Advertisement

loading