Operating Instructions - Sony MFM-HT75W Service Manual

Front of the LCD Display
5
Side view of the LCD Display
12
Rear of the LCD Display

OPERATING INSTRUCTIONS

PROG
PROG
2
1
2
4 3
6
7
8
9
10
11
13
1. Remote control sensor
This sensor receives a signal from the remote control.
Be sure not to cover the sensor with papers, etc.
2. Light sensor
This sensor measures the brightness of the
surrounding area.
Be sure not to cover the sensor with papers, etc.
3. (power) switch
Press to turn the display on or off.
4. (power) indicator
The power indicator lights up in green when the display
is turned on, and lights up in orange when the display
is in the power saving mode. Also, the power indicator
lights up in red when the display is in the standby mode
or the Sleep timer is activated.
5. Stereo speakers
These speakers output the audio signals as sound.
6. MENU button
Press to turn the menu screen on and off.
7. PROG+/– buttons
Press to change the TV channel.
8. and +/– (volume control) buttons
Use to select the menu items and to make
adjustments, and also display the "Volume" adjustment
bar to control the volume.
9. (input select)/OK button
This button functions in two ways.
As the button, this button switches the input signal
between PC 1, PC 2, TV, VIDEO 1, and VIDEO 2 when
two computers and two pieces of video equipment are
connected. As the OK button, this button activates the
selected menu item or adjustments made using the
buttons 8.
10. (PinP) button
Press to switch the "PIP" (Picture In Picture) setting.
Each time you press this button, the PIP setting
changes as follows.
PIP On PIP Off
11. (Picture Mode) button
Press to switch the Picture Mode.
12. Headphones jack
This jack outputs audio signals to the headphones.
13. Connector cover
Remove this cover when you connect cables or cords.
– 10 –
PIP On...
MFM-HT75W/HT95 (E)