Interlogix DIGITAL INVERTER GENERATOR Installation Sheet page 5

5. Press and hold the Arm and Disarm buttons
simultaneously for 2 seconds. This will send a tamper
message to the receiver.
"New Device Found" will appear and the Serial Number
6.
field will contain your wireless device details:
7. Assign the keyfob to a user by selecting the user name in
the drop down. When the keyfob buttons are pressed, the
user's permissions will be checked and the user number
will be reported.
If the keyfob is not assigned a user, then it will be given
Standard User permissions and have access to arm and
disarm area 1. The keyfob number will be reported when it
is used.
P/N 466-2948 • REV A • ISS 14DEC17
8. Select the buttons to enable:
Pressing the Arm and Disarm buttons simultaneously can
send a Police event "Silent Codepad Alarm".
Pressing the Scene (lightbulb icon) and Stay (*) buttons on
a 4-button keyfob can send an Auxiliary event "Codepad
Auxiliary Alarm".
9. If the user desires automation control when the Scene
button (lightbulb icon) is pressed, select the Scene to
trigger from the drop down menu:
Removing Wireless Devices
1. Log in to the xGen control panel.
2. Click Settings.
3. Select Zones in the drop down menu.
5 / 54