Worx MAKERX WX747 Original Instructions Manual page 16

If the tool is to be used regularly then invest in anti vibra-
tion accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
Category Model
WA7160
20V Hub/
EN HubX
16
WA7161
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
MakerX series tools and 20V Hub/HubX are specially
designed to work together, so do not attempt to use any
other devices.
Capacity
Input: 20 V 10 A
Max.
Output: 20 V 10
A Max.
Input: 20 V 10 A
Max.
Output: 20 V 10A
Max.
Or Output: 5 V 2 A
(USB port)
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE:
The machine is intended for cleaning and painting.
ASSEMBLY
1. Fitting the nozzle. (See Fig. A1, A2, A3, A4)
Long nozzle and short nozzle are suitable to dust
surfaces. The difference
between them lies in the air force. A short nozzle is
more powerful.
Brush adapter should be equipped with long nozzle or
short nozzle to use.
Air blade nozzle is used to clean up trash and dust in
crevices.
In addition to cleaning, tip nozzle and air blade nozzle
can be used for painting.
2. Connect the mini blower to the hub. (See Fig. B)
WARNING: Before operation, make sure the
speed control button on the hub is at the"Min"
position. (See Fig. C)