Worx MAKERX WX747 Original Instructions Manual page 15

Max Wind Speed
Runtime (2.0 Ah)
Machine weight
(bare tool)
* X=1-99, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes
between these models.
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibratione a
Uncertainty K = 1.5 m/s²
30 m/s
45-60 mins
210 g
L : 75.2 dB(A)
pA
L : 86.2 dB(A)
wA
3 dB(A)
<2.5 m/s
2
h
The declared vibration total value may be used for com-
paring one tool with another, and may also be used in a
preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the declared
value depending on the ways in which the tool is used
dependant on the following examples and other
variations on how the tool is used:
How the tool is used.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle but not actually doing the job. This may
significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
EN
15