Table of Contents
Advertisement
ELECTRICAL ADJUSTMENT
1. ELECTRICAL ADJUSTMENT PROCEDURES
<Before Adjustment>
As for the preparation of the adjustments, the required
equipments, connection diagrams and initial settings
are described in the item 1-1.
The total adjustments containing all adjustment pro-
cedures are described in the item 1-2 to overhaul the
unit.
Adjust from the beginning to the last step by step.
Don't omit any procedure, otherwise the adjust-ment
will be incorrect.
Partial adjustment procedures are shown in the flow-
chart in the item 1-3. Adjust according to the flowchart,
otherwise the adjustment will be incorrect.
1-1. Preparations
1-1-1. Equipment Required
•
AC adaptor
•
Waveform monitor (WFM)
•
Vector scope
•
Frequency counter
•
Digital voltmeter
•
Color monitor
•
Plastic chip screwdriver
•
Lights (TOSHIBA photo reflector lamp 500W
x 2, or a halogen lamp 500W x 2)
•
White paper (paper for copy, etc.)
•
Extension jig kit (23007565)
(used when repairing)
SECTION 2
6P FFC
To PC02
(REAR)
To PF02
(FRONT)
2-1
To PH01
(DRIVER)
Fig. 1
To PA01 WJ03
(DSP)
Fig. 2
28P FFC
WJ01
Fig. 3
20P FFC
WJ02
Fig. 4
To PN01
(DSP)
PB9953-1
To Front SW
PB9953-2
To PH03
(DRIVER)
To PH02
(DRIVER)
Advertisement
Table of Contents
