Canon N1000 User Manual page 25

Important
Never touch the printed surface of a printed transparency until it has dried for at
least 15 minutes, and never stack printed transparencies.
Remove each sheet from the output tray as it is ejected from the printer. To prevent
smearing, never allow printed transparencies to stack on the output tray.
Color Bubble Jet Transparencies (CF-102) should not be printed at high speed.
Printing at high speed could cause double-feeding and jamming.
Using transparencies of another manufacturer could cause them to jam.
Quick Dry Transparencies
Highly transparent film that dries quickly. Ideal for large volume print
jobs with transparencies.
Canon product:
Color Bubble Jet Transparencies Quick Drying Type (CF-401)
Important
You must always print on the correct print side (the rough side) of this film, and
load the edge of each sheet marked with the white tape into the printer first.
To prevent a jam, do not remove the white tape from the sheet before printing. The
tape can be removed after printing.
Print Media That Can Be Used
2-3