Sharp CD-RW5000 Service Manual page 18

CD-RW5000
LIFT GEAR A
146
110
147
111
When the height of
STB holder is low,
(Increase the clearance.)
Bend this part.
Scale: 2 magnifications
All manuals and user guides at all-guides.com
142
145
When the height of
Adjusting procedure
STB holder is high,
1. Turn the mode big gear approx. 37 degrees in the arrow direction.
(Decrease the clearance.)
2. Viewing from the front side of the mechanism, verify that the guide ribs
3. If they are not, bend the lever for adjustment. (Refer to the details.)
240 Note: Also apply the same adjustment on the R side.
OS LEVER
Bend this part to adjust the height of the STB holder.
Details
Figure 18
– 18 –
141 143
STB HOLDER HEIGHT ADJUSTING METHOD
(CHANGE BOX L/R and STB HOLDER)of tray are as tall as each other.
Height of the rib
180
TOP PLATE F
37°
Mark position
132
133
130
135
140
144
180
TOP PLATE F
140
130
135