Advertisement
Quick Links
S i 5 3 11 9 E
VAL UAT I O N
Description
The Si53119-EVB can be used to evaluate the Si53119-
A01AGM, 19-output PCIe buffer in zero delay and non-
zero delay modes.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021
B
U
'
O A R D
S E R
Features
10-inch traces to evaluate signal integrity at the
longest trace lengths
DC pin controls per data sheet specification.
Ability to measure input to output propagation
delay.
Ability to program features of Si53119 via I
lines.
Si 5 3 119 - EVB
G
S
U ID E
The signal traces of the input and outputs have a
single-ended impedance of 50 , and differential
impedance of 100 .
The series resistance on the outputs are set to match
to this impedance design.
2
C
Advertisement
Related Manuals for Skyworks Si53119
Summary of Contents for Skyworks Si53119
- Page 1 Ability to program features of Si53119 via I lines. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021...
- Page 2 Figure 1. Schematic 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021...
- Page 3 Figure 2. Schematic 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021...
- Page 4 Figure 3. Schematic 3 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021...
-
Page 5: Input And Power Supply Sequencing
3. Input and Power Supply Sequencing The Si53119 should be powered up with supply at both the VDD and VDD_IO nodes (at the jumpers available on the EVB). A 100 MHz or 133 MHz HCSL input clock should be applied to pins 8 and 9, and should comply with HCSL formats. -
Page 6: Usage Of The Evb
6. Modification of the device settings via the I C interface. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021... -
Page 7: Bill Of Materials
QFN72 Si53119‐A00AGM Skyworks SiLabs Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 0.1 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 17, 2021... - Page 8 Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer.
Need help?
Do you have a question about the Si53119 and is the answer not in the manual?
Questions and answers