Machine-Specific Safety Warnings; Intended Use - BorMann BPH1000 User Manual

EN
do the job better and safer when used at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn activate or deactivate it. Any power tool that cannot be controlled
with the switch is extremely dangerous and must be repaired.
c) Disconnect the main plug from the power source and/or the battery pack from the power tool before changing accessories,
making any adjustments, or storing power tools. Such preventive safety measures will reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to use and operate the power tool.
Power tools are extremely dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, leakage and any other
condition that may affect the power tool's operation. If damaged, please have the power tool repaired before use. Many
accidents and injuries are caused by poorly maintained power tools.
f) Keep all the cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind
and are more precise and easier to control.
g) Always use the power tool, accessories and tool bits etc. in accordance with the instructions of this instruction manual,
taking into account the working conditions and the work to be performed.
Use of the power tool for applications different from those intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair technician using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.

Machine-Specific Safety Warnings

• Wear ear protection. The impact of noise can cause damage to hearing.
• Unplug your tool from the mains when you are not using it ,when changing tools or for maintenance.
• Store the tool in a dry place, far from sources of heat and dangerous vapours. Do not operate your tool near explosive or
inflammable materials.
• The tool should always be used with its additional handle and must be firmly held with both hands.
• For tools equipped with an lubrication system: Before each use, check the oil level, the tightening of screws, the correct
mounting of the drive spindle.
• Always check the surface for hidden cables or pipe lines. Use an appropriate detector in order to detect any live or metallic
parts before using the tool (for example, locate a live wire in a wall by using a metal detector).
• Do not try to disassemble or dismantle the tool by yourself.
• Only a competent and specialized service technician is allowed to repair or disassemble the tool, by using the genuine
spare parts and the manufacturer's instructions.

Intended Use

Electric hammers are designed to break, scale, drill, concrete or similar materials. For example, they can be used for the
installation of tubes, cables etc. οn walls and other similar surfaces.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may
also concern other models of the manufacturer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
4
WWW.BORMANNTOOLS.COM