Related Manuals for WOODPLAY PG203
Summary of Contents for WOODPLAY PG203
- Page 1 PG203 (MONKEY BARS) PA-MA-0006-05 817 Maxwell Avenue • Evansville, IN 47711 • 1-800-GO-SWING • www.escaladesports.com • ©2016 Escalade Sports...
-
Page 2: Parts List
PARTS LIST ITEM NO. PART NUMBER DESCRIPTION QTY. PG-HW-M005 MONKEY BAR BRACKET PG-HW-M006 MONKEY BAR TRIANGLE PLATE PG-ST-0002 19" ROUND RUNG PG-44-0012 HORIZONTAL LADDER RAIL - RIGHT PG-44-0011 HORIZONTAL LADDER RAIL - LEFT PG-ST-0001 25 3/4" ROUND RUNG PG-44-0009 VERTICAL LADDER RAIL - LEFT PG-44-0010 VERTICAL LADDER RAIL - RIGHT PG-HW-S006... -
Page 3: Standard Parts
STANDARD PARTS MONKEY BAR BRACKET 19” ROUND RUNG MONKEY BAR TRIANGLE PLATE PG-HW-M005 PG-HW-M006 PG-ST-0002 (2 ) (2 ) 25 3/4” ROUND RUNG PG-ST-0001 HORIZONTAL LADDER RAIL - LEFT HORIZONTAL LADDER RAIL - RIGHT PG-44-0011 PG-44-0012 VERTICAL LADDER RAIL - LEFT VERTICAL LADDER RAIL - RIGHT PG-44-0009 PG-44-0010... - Page 4 HARDWARE Measurement taken from bottom of bolt head to the bottom of bolt 1/4"" X 1.5" Lag Screw 1/4" Flat Washer PG-HW-L001 PG-HW-W002 5/16" Flat Washer PG-HW-W003 5/16” x 2.5" Lag Screw PG-HW-L003 3/8" Flat Washer #10 X 2” Self Tapping Screw PG-HW-W004 PG-HW-S006 (20)
- Page 5 VERTICAL LADDER RAILS ASSEMBLY PARTS NEEDED 25 3/4” ROUND RUNG VERTICAL LADDER RAIL - LEFT VERTICAL LADDER RAIL - RIGHT 1. On a flat surface lay item #8 with holes facing up, insert items #6 into holes. 2. Lining up holes with items #6 place item #7 onto items #6.
- Page 6 VERTICAL LADDER RUNG TO LADDER RAILS ATTACHMENT HARDWARE NEEDED #10 X 2” SELF TAPPING SCREWS 1. Lay Vertical Ladder Assembly with screw holes facing up, and secure items #6 to items #7 and #8 with hardware item #9...
- Page 7 HORIZONTAL LADDER RAILS ASSEMBLY 1. On a flat surface lay item #5 with holes facing up, insert items #3 into holes. 2. Lining up holes with items #3 place item #4 onto items #3. 3. Once all items are in place secure by tapping item #4 lightly with rubber mallet ensuring items #3 are firmly seated in items #4 and #5.
- Page 8 HORIZONTAL LADDER RUNG TO LADDER RAILS ATTACHMENT PARTS NEEDED MONKEY BAR BRACKET HARDWARE NEEDED #10 X 2” SELF TAPPING SCREWS (12) 1/4" WASHER FLAT 1/4" X 1.5” LAG SCREW " NOTE: Install #1 Brackets on the opposite end of the countersinks. 1.
- Page 9 NOTE: Three holes are provided in the Vertical Ladder to allow for adjustment of grade of yard. Use center hole for level ground. PARTS NEEDED VERTICAL LADDER ASSEMBLY 1. Attach item #2 to Horizontal Ladder Assembly using pre-drilled hole and hardware HORIZONTAL LADDER ASSEMBLY item #12 and #13.
- Page 10 PARTS NEEDED PLAY SET ASSEMBLY MONKEY BAR ASSEMBLY HARDWARE NEEDED 1/4" WASHER FLAT 1/4" X 1.5” LAG SCREW 1. Center and place Monkey Bar Assembly against Play set Assembly as shown. 2. Attach using hardware items #10 and #11 as shown.
- Page 11 This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for use. Woodplay does not assume or authorize any person to assume for us, any other liability in connection with the sale of our products.
Need help?
Do you have a question about the PG203 and is the answer not in the manual?
Questions and answers