Receive Mode Settings; Ring Delay; Fax Detect - Brother IntelliFAX 1360 User Manual

Chapter 6

Receive mode settings

Ring Delay

The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode.
a
Press Menu, 2, 1, 1.
b
Press a or b to choose how many
times the line rings before the machine
answers (02-10 for Australia, 01-10 for
New Zealand, 00-10 for some
countries).
Press OK.
If you choose 00, the line will not ring at
all.
c
Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the phone company. Only
the machine rings and no other phones on the
same line will ring with the special
pseudo/double-ring. However, you can still
answer the call on any telephone.
a
Press Menu, 2, 1, 2.
b
Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds for Australia and some
countries, 20, 30, 40 or 55 seconds for
New Zealand).
Press OK.
c
Press Stop/Exit.
28
Note
6
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
6
continue to ring for the set time.

Fax Detect

If Fax Detect is On (default setting):
The machine receives fax calls automatically,
even if you lift the machine's handset or lift the
handset of an extension or external phone.
When you see Receiving on the LCD or
when you hear 'chirps' through the handset of
an extension phone connected to another wall
socket/phone socket, just replace the handset
and your machine will do the rest.
If Fax Detect is Semi:
The machine will only receive a fax call
automatically if you answered it using the
machine's handset. If you answered at an
6
extension phone press l 5 1. (See Operation
from extension telephones on page 42.)
If Fax Detect is Off:
If you are at the machine and answer a fax
call by lifting the handset, press Start.
If you are not at your machine, press l 5 1
(l 9 1 for New Zealand) on the extension
phone. (See Operation from extension
telephones on page 42.)
6
6
6
6