Change Frame; Main Functions Of The Weather Station - ADE WS 1914 Quick Manual

If a sufficiently strong signal has not been received,
the base station cancels the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.

Change frame

Two interchangeable frames are included. The attached
frame is held in place by magnets on the base station.

Main functions of the weather station

Additional functions are described in the full operating
manual.
Weather forecast and weather trend
After start-up, the information can still not be used for
weather forecasting for approximately 12 hours, since the
weather station needs this time to collect and analyse
the weather data. The weather forecast is based on the
collected data and the measured air pressure changes.
The forecast pertains to the region around the weather
station with a radius of approx 30 to 50 km, for a period of
10
QSG WS 1914 Druckbuch 3 sprch.indb 10 QSG WS 1914 Druckbuch 3 sprch.indb 10
− To change the frame, pull
Weather Station with Wireless Outdoor Sensor WS 1914
the attached frame for-
ward and replace it with
the other frame. Use a
small recessed grip on the
underside.
11.06.2020 09:06:43 11.06.2020 09:06:43