Table of Contents
Advertisement
DMX Address. Press Enter to select the start address channel. The first display will let you
know what operation mode you are in. Use the Up/Down keys to select the desired start
address. Press Enter to confirm.
Ch-Mode. This function allows you to select dmx channel mode. Press Enter to use Up/Down
keys to select desired channel mode: 2 channels or 4 channels. Press Enter to confirm the
setting.
Curve Mode This function allows you to select dimmer curve mode. Press Enter to use
Up/Down keys to select desired Mode settings: Curve1/Curve2/Curve3. Press Enter to confirm
the setting
Back Light This function allows you to make back light be OFF or ON after setting, Press
Enter to use Up/Down keys to select desired Mode settings. Press Enter to confirm the setting
Reset This function allows you to make fixture be reset by manual, Press Enter to use
Up/Down keys to select desired Mode settings. Press Enter to confirm the setting
Strobe This function allows you to select strobe effect from 000-255, Press Enter to use
Up/Down keys to select desired effect settings. Press Enter to confirm the setting
Dimmer This function allows you to select LED intensity from 000-255, Press Enter to use
Up/Down keys to select desired intensity settings. Press Enter to confirm the setting.
WW This function allows you adjust warm white intensity from 000-255,Press Enter to use
Up/Down keys to select desired intensity settings. Press Enter to confirm the setting
- 5 -
Advertisement
Table of Contents
