Tv Buttons; Initial Setup - TCL 43P717 Operation Manual

TV Buttons

- Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one
You can turn on the TV by pressing the
While the TV is on, the multi-function menu appears by pressing
about how to use the multi-function menu, please refer to the figure below.
• Press to move the highlight to the next function selection
• Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate.
Figures and illustrations are provided for reference only and may vary depending on the model.
- MIC switch
The MIC switch is located next to the power button. If you want to use the feature of hands-free TV voice control,
turn on the switch(not available for some models).

Initial Setup

The first time you switch the set on, the Welcome screen appears, which guides you through the initial setup process.
Follow the on-screen instructions to finish the initial setup process such as selecting the language, connecting to the
network, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the
setup later from the settings menu.
button. It may work just as Power on/Standby button, or as a multi-function controller.
button at the bottom left of the TV back case.
button on the TV set. More information
9
Getting Started