Indesit 6G25S/U Installation And Use Manual page 21

The cooker with gas oven and electric grill
A. Tray for Catching Overflows
B. Gas Burner
C. Flame Failure Device for Cooktop Burners
D. Top Grate
E. Control Panel
F. Adjustable Feet or Legs
G. Dripping Pan or Baking Sheet
H. Electronic Lighting Device
K. Oven Rack
M. Oven and Grill Control Knob
N. Control Knobs for Gas Burners on Hob
O. Button for Oven Light
P. Timer Knob
Q. Grill Operating Light
R. Electronic Lighting for Hob Burners (only a few
models)
S. Door lock device (only a few models)
O
R
P Q M
The various functions included in the cooker are selected
by operating the control devices located on the cooker
control panel.
Control Knobs for the Gas Burners on the Hob (N)
The position of the gas burner controlled by each one of
the knobs is shown by a symbol of a solid ring:
one of the burners, hold a lighted match or lighter near
the burner. Press down and turn the corresponding knob
in the counter-clockwise direction to the maximum
setting. Each burner can be operated at its maximum,
minimum or intermediate power. Shown on the knob are
the different symbols for off
when the symbol lines up with the reference mark on the
control panel), for maximum
To obtain these settings, turn the knob counter-clockwise
with respect to the off position. To turn off the burner, turn
the knob clockwise until it stops (corresponding again with
•
the symbol).
(only a few models)
N
The different functions and uses
•
. To light
•
(the knob is on this setting
-
+
and minimum .
P Q
M
Electronic Ignition for the Gas hob
Some of the models are provided with instant electronic
lighting of the hob gas burners; these models are identi-
fied by the presence of a lighting device (see detail H).
This device operates when a slight pressure is applied to
the "R" button marked with
burner just press the button labelled "R" while pushing the
corresponding knob all the way in and turning it counter-
clockwise until it lights. For immediate lighting, first
-
press the button and then turn the knob. Some mod-
els come equipped with an electric starter built into the
knob, in which case the lighting device labelled "H" is
present while the button labelled "R" is not. To light a spe-
cific burner push the corresponding knob all the way in
and turn it counter-clockwise to maximum
pressed down until the burner lights.
Important: Should the burner flames accidentally go
out, turn off the control knob and wait at least 1 minute
before trying to relight.
21
A
E
K
G
F
O
N
symbol. To light a specific
-
B
D
S
keeping it