MSI VB9 User Manual page 34

HDD & FDD
DMA/master
Modem Ring Resume
RTC Alarm Resume
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

Power Management:
saving and is directly related to the following modes:
Doze Mode , Standby Mode ,Suspend Mode , HDD Power Down
There are four selections for Power Management, three of which have fixed mode settings.
Disable (default)
Min. Power Saving
Max. Power Saving
User Defined

PM Control APM: When enabled, an Advanced Power Management device will be
activated to enhance the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to No.

Video Off Method: This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
Blank Screen
DPMS

Video Off After:
power saving mode.
N/A
Suspend
Standby
Doze

MODEM Use IRQ: Name the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
The choices: NA, 3, 4, 5, 7, 9, 10, 11

PM Timer: The following four modes are Green PC power saving functions which are
only user configurable when User Defined Power Management has been selected see above
for available selections.

Doze Mode: When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
: ON
: OFF
: Disabled
: Disabled
F6:Optimized Defaults
This category allows you to select the type (or degree) of power
No power management. Disables all four modes
Minimum power management. Doze Mode = 1 hr. Standby Mode =1
hr., Suspend Mode = 1 hr., and HDD Power Down = 15 min.
Maximum power management -- ONLY AVAILABLE FOR SL
CPU'S. Doze Mode = 1 min., Standby Mode = 1 min., Suspend
Mode = 1 min., and HDD Power Down = 1 min.
Allows you to set each mode individually. When not disabled, each
of the ranges are from 1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
horizontal synchronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
When enabled, this feature allows the VGA adapter to operate in a
Monitor will remain on during power saving modes.
Monitor blanked when the systems enters the Suspend mode.
Monitor blanked when the system enters Standby mode.
Monitor blanked when the system enters any power saving mode.
IRQ15 (Reserved)
F7:Standard Defaults
31
: Disabled
F1:General Help