MSI MS-6322M Manual page 9

CHAPTER 2
• Fan Power Connectors: CPUFAN/SYSFAN
These connectors support system cooling fan with + 12V. It supports
three pin head connector. When connecting the wire to the connec-
tor, always take note that the red wire is the positive and should be
connected to the +12V, the black wire is Ground and should be
connected to GND. If your mainboard has System Hardware Monitor
chipset on-board, you must use a specially designed fan with speed
sensor to take advantage of this function.
For fans with fan speed sensor, every rotation of the fan will send out 2
pulses. System Hardware Monitor will count and report the fan rotation
speed.
Note: 1. Always consult vendor for proper CPU cooling fan.
2. CPU FAN supports the FAN control. You can install PC Alert
utility. This will automatically control the CPU FAN Speed according
to the actual CPU temperature.
CPUFAN: Processor Fan
SYSFAN: System Fan
2-3
HARDWARE INSTALLATION
CONTROL
+12V
SENSOR
CPUFAN
SENSOR
+12V
CONTROL
SYSFAN