CHAPTER 2
External LED Connector: J11
The mainboard provides an external LED connector which will lit while the
system power is on. You can connect a Power LED from the system case to
this connector. There are two types of LED that you can use: 3-pin single
color LED or 2-pin dual color LED (ACPI request).
J11
Connect pin 1, 2 & 3. This will lit
when the system is on.
1
3
Connect pin 2 & 3.
Green color: System is in full mode.
Orange color: System is in suspend mode.
1
3
HARDWARE INSTALLATION
Function
2-27
1
3
J11