Quick Start; Unpack; Charging The Wws550I; Setting Up The Bluetooth Adapter - Wasp WWS550i Quick Start Manual

Hide thumbs Also See for WWS550i:

Table of Contents

QSG

Quick Start

Open the box and remove all the pieces from their protective packaging.

You must charge the scanner for 4 hours before first using it. To charge

the scanner, plug the power supply into the bottom of the scanner.

If you already have Bluetooth setup on your PC or device, please continue

to the next step.

To setup Bluetooth on your PC, you will need to insert the Bluetooth

adapter into an available USB port. Windows will detect the adapter and

install the required Microsoft Bluetooth software. If Windows does not

detect the Bluetooth adapter, please remove the adapter and insert the CD

with the adapter's Bluetooth software on it. Follow the instructions on the

CD for installing the Bluetooth software.

The scanner will connect to most Bluetooth devices that support HID

connection.

You will need to open your Bluetooth software and search for Bluetooth

devices. The Bluetooth software can be found by clicking the Bluetooth

symbol on the start bar near the computer time. If the Bluetooth symbol is

not found, there could be a problem with the Bluetooth adapter installation.

Table of Contents