Advertisement
CONTROLS AND INDICATORS ON YOUR PA-2©
VOLUME: The volume control sets the output level of the main output, front fader
output, and rear fader output on the PA-2
settings.
FADER: The fader control balances the signal level between the front fader and
rear fader stereo outputs on the PA-2
The maximum output level on the front fader and rear fader outputs is set by the
volume control.
sub:
EQ CONTROLS;
bass:
mid:
treble: 14kHz
without affecting the input gain
©
without affecting the input gain settings.
©
45Hz
+/- 16dB
190Hz
+/- 12dB
3.5kHz +/- 12dB
+/- 12Db
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER™ is a trademark of Linear Power, Inc.
5
Advertisement
