Optional Connections And Additions; Using Digital Audio Connections; Making Coaxial Digital Audio Connections; Making Optical Digital Audio Connections - Bose LIFESTYLE VS-2 Installation Manual

Dvd home entertainment systems with video enhancer
Hide thumbs Also See for LIFESTYLE VS-2:
Table of Contents

Advertisement

Available languages

Available languages

English
Deutsch
Español

Using digital audio connections

Figure 18
Digital audio connections
Français
Italiano
Nederlands
O
PTIONAL
The media center provides two types of digital audio input
connections (Figure 18):
• Coaxial digital (D) audio connection – requires a 75Ω coaxial
cable with RCA connectors.
• Optical digital audio connection – requires an optical digital
cable (included).
If you need cables, you can find these in consumer electronics retail stores.
Media center connector panel
Optical IN
optical digital
audio
Note: When using a digital audio connection, be sure to maintain your analog connection, too.
In this way, you ensure continuous sound when a digital signal is absent or interrupted. It also
supports the use of a Bose

Making coaxial digital audio connections

Using a 75Ω coaxial cable with RCA connectors, connect the digital (D) audio output of each
source to its respective digital (D) audio input on the media center.
Note: To make digital recordings from a connected optical component, connect another optical
cable to the Optical OUT jacks on the media center rear panel.

Making optical digital audio connections

Only one audio source output can be connected to the media center using an optical cable.
Connect the optical output of your selected source to the Optical IN connector on the media
center. After turning on the system, you need to activate this connection in the system menu.

Activating an optical connection

1. Turn on your TV and LIFESTYLE
2. Press the System button on the LIFESTYLE
3. Press the right arrow key and highlight the Media Center tab. Press Enter.
4. Press the down arrow key and highlight Optical Source. Press Enter.
5. Select the component that is connected to the Optical IN connector. Press Enter.
6. Press Exit to leave the System menu.
Note: You also may need to activate the optical output in the audio source.
Svenska
C
ONNECTIONS AND
D Audio IN
coaxial digital
audio
®
link connection for expansion into other rooms.
®
system.
®
system remote.
A
DDITIONS
RCA coaxial cable
Optical digital cable
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents