IMPORTANT
• If the postcards are warped, correct the warp so that it does not exceed 2 mm in an
• If you are using postcards that have been cut badly, they may overlap when
3
Load the stack of postcards into the paper tray.
If you want to print on the side on which an address will be written, load
postcards with the print side of the postcards facing down and the top edge of
the postcards going into the printer first.
IMPORTANT
• You can load up to 30 postcards into the paper tray. Make sure that the stack is not
• Be sure to load postcards in the portrait orientation.
30
upward direction before loading them into the tray.
No more than
2 mm
delivered. If you are using such postcards, fan the stack of postcards well, and then
load them into the tray.
Limit Mark
higher than the limit guide.