Canon LBP-2710 User Manual page 73

Canon user's guide laser beam printer lbp-2810/2710 lbp5800/5700
Table of Contents

Advertisement

14 X カートリッジ ナシ
(X is Y , M, C, or K.)
16 X トナー チェック
(X is Y , M, C, or K.)
<Warning message>
16 X トナー コウカン
(X is Y , M, C, or K.)
<Error skip>
17 カセット n ヨウシ ナシ 
(n is the cassette number.)
<Warning message>
18 カセット キュウシ フカ
1F ハイシトレイ チェック
<Warning message>
1F ハイシトレイ フル
<Error skip>
72
Message
Cause and Remedy
Cause:
The toner cartridge for the color
indicated on the display has not been
installed or it has not been installed
correctly.
Remedy: Install the toner cartridge or re-install
the toner cartridge correctly.
Cause:
The amount of remaining toner for
the color indicated on the display is
low.
Remedy: Printing can be continued, however
you should prepare the new
cartridge. If you are printing a large
volume, we recommend that you
replace the cartridge.
Cause:
The cartridge for the color indicated
on the display is almost out of toner.
Remedy: Press [
オンライン
printing. Printing can be continued
for a while however you should
prepare the new cartridge. If you are
printing a large volume, we
recommend that you replace the
cartridge.
Cause:
Paper in the cassette of the number
indicated on the display has run out.
Remedy: Load paper into the cassette of the
number indicated on the display.
Cause:
The paper type specified cannot be
fed from the paper cassette.
Remedy: Only plain paper can be fed from the
paper cassette. Set [
] to [
イプ
フツウシ
paper source to the paper tray before
you print.
Cause:
Output tray is almost full.
Remedy: Remove the paper from the output
tray.
Cause:
Output tray is full.
Remedy: Remove the paper from the output
tray.
] to continue
デフォルト用紙タ
] or switch the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp-2810Lbp5700Lbp5800

Table of Contents