Loading Envelopes - Canon LBP-2510 User Manual

4
Move the slide guide so that they closely fit against both
edges of the postcard.
IMPORTANT
•
Be sure to adjust the slide guide to the width of the postcard.
If there is too much space between the postcard stack and slide guide, or if the
slide guide is set too tightly against the postcard stack, it may result in misfeeds or
paper jam.
•
Do not touch or remove the postcards from the tray while printing. It may result in a
printer malfanction.

Loading Envelopes

Envelopes can be printed from the multi purpose tray. Load envelopes in the
following procedure.
Youkei No.4（105mm×235mm ）
Envelope Y401 Canon
for LBP/recommended
IMPORTANT
•
Do not use self-adhesive envelopes. It may result in deterioration in print quality or printer
malfunction.
•
When printing on envelopes, data cannot be printed in the 10mm border around the
envelopes.
NOTE
When printing on envelopes, images printed on the flap or adhesive surface on the back
of the envelope may blur or the trailing edge may come out dirty.
* Envelopes with a flap on the short edge cannot be used.
Youkei No.2（114mm×162mm）
Envelope Y201 Canon
for LBP/recommended
Loading Paper in the Multi Purpose Tray 33