Canon LBP-2510 User Manual page 74

Canon laser beam printer user's guide lbp-2510, lbp5500
Table of Contents

Advertisement

37 ヨウシタイプ フカノウ
40 ツウシン エラー
<Error skip>
41 プリント チェック
<Error skip>
9A カセット 1 ガイドフセイ
9B ヨウシ フセイ
<Error skip>
9E カートリッジ ミスマッチ
Cause:
The paper type specified cannot be
printed.
Remedy: Press [
オンライン
be printed as plain paper. If the
paper is not plain paper, the data
may not be printed properly.
Cause:
An error occurred when data was
being transferred between a PC and
the printer.
Remedy: Check the interface cable connection
and print the data again.
Cause:
The sizes of the paper loaded in the
paper cassette and paper tray are
different to the paper size settings
specified on the PC or the control
panel.
Remedy: When paper is being fed from the
paper cassette, make sure that the
size of the paper loaded in the paper
cassette is the same as the paper
size settings for the paper cassette.
Also when paper is being fed from
the paper tray, make sure that the
size of the paper loaded in the paper
tray is the same as the paper size
settings for the paper tray before you
press [
オンライン
Cause:
The paper guides of the cassette 1 is
out of position.
Remedy: Set the paper guides to the size of
the paper loaded in the cassette 1.
Cause:
The type of the paper fed from the
paper cassette or paper tray is
different to the paper type setting.
Remedy: Press
[ オンライン
job. Correct the paper type setting or
load the paper of the type specified
in the paper type setting into the
paper cassette or paper tray.
Cause:
The cartridge has been installed in
the wrong position.
Remedy: Remove the cartridge indicated on
the display from the printer, and then
re-install it in the correct position.
When a Message Is Displayed
] and the paper will
].
] to cancel the print
73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp5500

Table of Contents