Before Washing - Malber Fust WD 800 Installation And User Instruction

Libretto Malber WD 800.FH9 Mon Mar 26 17:07:13 2001

BEFORE WASHING

- with dry hands, insert the plug in the mains socket.
- sort the wash into types of fabric (refer to clothing care
symbols).
-
check that there are no objects left in any of the pockets
of the items to wash, as these may damage the washing,
the appliance or the filter.
IF FORESEEN
CONTAINER
LIQUID
DETERGENT
- add low-suds detergent and softener (if required)
recommended for automatic washing machines. Follow
the dosage instructions written on the packet.
N.B. Excessive softener can damage the washing.
- Select the required programme and temperature according to the
programme table.
6
Colori compositi
Pagina 8
Before each wash ensure that:
- the water connections are correct, the drain
hose is properly positioned (see water
connection) and that the feed valve is open
- open the door
- load the washing and close the door.
N.B. When adding detergent to the dispenser,
remember to avoid any spillage into the softener
compartment, in that this would create a soapy
rinse and stain the fabrics white. Vice versa, if
softener is added to the detergent compartment,
the quality of the wash will be compromised.
N.B. When using a liquid detergent (recommended
for programmes without pre-wash), use the special
container (if provided) and follow the manufacturer's
instructions.
Remember to remove the liquid detergent container
when using soap powder.
- close the detergent dispenser drawer.
Warning! do not attempt to remove the detergent drawer
while the appliance is operating, as this will cause water
to flow out.
YES
SM695
closed
opened
NO