Table of Contents
Advertisement
Libretto Malber WD 800.FH9 Mon Mar 26 17:07:13 2001
DESCRIPTION OF THE MACHINE
The machine is a domestic appliance capable of washing any type of fabric at any time.
* The machine has been constructed in steel panels which have been treated and painted to guarantees that
its aesthetic qualities remain unaltered over time.
* The motor and all moving parts have been designed and manufactured to guarantee the minimum possible
noise levels
* The large well-mounted stainless steel drum will ensure a better quality wash and help to prolong the life
of your washing
* The easy to use control panel will satisfy all your washing and drying needs (see control panel and programme
table).
* The wide door makes loading and unloading your washing much easier.
* The very high stability of the machine is the result of extensive research by our technicians on the equilibrium
of masses in movement.
INSTALLATION
Installation must be carried out by qualified personnel in line with the instructions supplied by the manufacturer.
Incorrect installation may result in damage or injury.
The machine can be installed anywhere providing the ambient temperature is not less than 3°C and the wires
or pipes on the rear of the machine are not squashed.
WARNINGS
For transport reasons,
the machine's oscillating
group is locked in place
by 4 spacers and
screws. Before using the
machine, remove the
spacers and locking
s c r e w s . K e e p t h e
screws and spacers for
future use.
For transport reasons,
t h e
m a c h i n e ' s
oscillating group is
locked in place by 4
spacers and screws.
B e f o r e u s i n g t h e
machine, remove the
locking screws with a
suitable wrench.
2
Colori compositi
Pagina 4
Depending on the model
Close off the holes
using the plugs
supplied. The plugs
can be found in the
bag containing the
V
documents.
N.B. If the spacers
cannot be removed
from the machine in
this way, open the rear
panel, remove them
and replace the panel.
Insert a screwdriver in
the holes and lever out
the 4 plastic spacers
as shown in the figure.
N.B. If the spacers
cannot be removed
from the machine in
this way, open the
rear panel, remove
them and replace the
panel.
SM695
Hide quick links:
Advertisement
Table of Contents
