Epson SC-T5400 Series User Manual page 180

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Settings item
PDF Settings
Document Open Password
Password
Setting
Password
Permissions Password
Password
Setting
Password
Printing
Editing
Resolution
Scan Size
Auto Detect
ISO A
US-ANSI
US-ARCH
JIS B
ISO B
User-Defined
Top Offset
Using the Menu
Settings value
*
Off
On
Enter password
*
Off
On
Enter password
*
Allowed
Not Allowed
*
Allowed
Not Allowed
200dpi
*
300dpi
400dpi
600dpi
-
Display supported scan
sizes
Display the Scan Size Input
screen
*
0.0 to 100.0mm (0.0 )
*
0.00 to 3.94inch (0.00 )
Explanation
Setting the file format to PDF allows you to set the security for the
PDF.
Set Document Open Password when you create a PDF that requires a
password to be opened. To create a PDF file for which a password is
needed to print or edit, set the Permissions Password.
Select the resolution for scanning.
The default setting of Auto Detect is recommended in most
situations. Note that, depending on the original, it may not be
possible to detect the width correctly even when the setting is Auto
Detect. Similarly, tracing paper and the optional carrier sheet are not
detected automatically. In such cases, change from the standard size
and specify a width of your choosing. If the desired size is not in the
options, then select User-Defined, and enter the length and width of
the original.
If you do not want to scan the top margin of the original, you can
adjust the top, and then scan. Enter the value for the length from the
top of where you want to start scanning.
If the carrier sheet is loaded, set the value to 19 mm.
180