Copy Menu (Sc-T5400M Series Only) - Epson SC-T5400 Series User Manual

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide

Copy menu (SC-T5400M Series Only)

*Default setting
Settings item
Basic Settings
Copies
Color Mode
Quality
Density
Paper Source
Reduce/Enlarge
Auto Fit Page
Custom Size
Using the Menu
Settings value
1 to 99
Black/White
*
Color
*
Speed
Fine
Super Fine
Draft
*
-4 to 4 (0 )
*
Roll Paper
Cut Sheet(1 sheet)
On
*
Off
Actual Size, ISO A4->A0,
ISO A3->A0, ISO A4->A1,
ISO A2->A0, ISO A3->A1,
ISO A1->A0, ISO A2->A1,
ISO A0->A1, ISO A1->A2,
ISO A0->A2, ISO A1->A3,
ISO A0->A3, ISO A1->A4,
ISO A0->A4, US ANSI/ARCH
A->E, US ANSI/ARCH B->E,
US ANSI/ARCH A->D, US
ANSI/ARCH C->E, US ANSI/
ARCH B->D, US ANSI/ARCH
D->E, US ANSI/ARCH C->D,
US ANSI/ARCH E->D, US
ANSI/ARCH D->C, US ANSI/
ARCH E->C, US ANSI/ARCH
D->B, US ANSI/ARCH E->B,
US ANSI/ARCH D->A, US
ANSI/ARCH E->A
Explanation
Specify the number of copies.
Select whether to copy in color or black and white.
Select the print quality.
Choose the density for the copy results. Negative values (-) are lighter
and positive values (+) are darker.
Select the paper source for copying and printing.
Set to On to enlarge the copy so that the short edge of the original fits
the width of the roll paper currently loaded in the printer.
If the short edge of the document is wider than the roll paper, this will
be printed at actual size.
If the printer is unable to detect the width of the roll paper, then an
error will occur when copying is started.
Select the output size.
170