Fuses - Hyundai KONA N 2022 Owner's Manual

FUSES

Blade type
A
Cartridge type
A
Multi fuse
A
A
[A] : Normal, [B] : Blown
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one
located in the driver's side panel bolster,
the other in the engine compartment.
B
If any of your vehicle's lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
If the electrical system does not work,
first check the driver's side fuse panel.
B
Before replacing a blown fuse, turn the
engine and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved. We
B
recommend that you immediately
consult an authorized HYUNDAI dealer.
NEVER replace a fuse with anything but
another fuse of the same rating.
B
OLF074075
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
WARNING
A higher capacity fuse could cause
damage and possibly cause a fire.
Do not install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.
09
9-47