Spot Cleaning Upholstery - Bissell SPOT LIFTER 1716 User Manual

O
perations
Cleaning (continued)
5. Check the collection tank and empty the tank
if it is full (See To empty the collection tank,
page 8).
6. If the Spot Lifter PowerBrush stops
spraying, turn off the unit and check the
cleaning solution level in the solution tank.
Refill if needed. Never run the unit without
water or cleaning solution.

Spot cleaning upholstery

1.
Check manufacturer's tag before cleaning.
"W" or "WS" on the tag means you can use
your Spot Lifter PowerBrush. If tag is coded
with an "S" (with diagonal strike-through) or
states "Dry Clean Only", do not proceed.
2.
If manufacturer's tag is missing or not
coded, check with your furniture dealer.
3.
If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
w w w . b i s s e l l . c o m
Tip:
You may also spray water
and formula, with the
manual trigger spray, while
the unit is turned on and
you are using the dual
PowerBrushes then suction
to clean.
Tip:
When cleaning a vertical
surface (ie: chair back, auto
interior, etc.) begin with a
completely empty collection
tank.
8 0 0 . 2 3 7 . 7 6 9 1
7