Advertisement
MAGICGRIP
™
PLACEMENT IN VEHICLES
It is possible for the transmitter to interfere with some wireless
systems within a car. Specifically, key fobs with immobilizers,
keyless start systems or tire pressure monitors. Therefore, it is
recommended to test the location of your transmitter before
deciding on final placement.
Most interference issues will be minimized by considering the
following placement guidelines:
• Install transmitter a minimum of 10 inches away from the
ignition lock, key fob docking station, or any location where
the key fob might be stored while driving.
If the transmitter cannot be located a sufficient distance away
as described above, please use the following suggestions
whenever possible:
• Insert the key fob into the docking slot whenever possible
while operating the transmitter.
• Connect the transmitter to a 12 volt accessory port that is
powered only while the vehicle's ignition is in the "ACC" or
"ON" position.
• Place phone on transmitter after vehicle is started.
TRANSMITTER
5
Advertisement
