Blanketrol
CoolRepeat
®
WARNINGS:
•
Blanketrol
CoolRepeat
Blanketrol system.
•
Once thermistor and cables are connected, verify
that temperature consistently displays on console
and monitor.
•
Discontinue use if LED on top of unit is not
illuminated when connected to thermistor.
•
Inspect all components prior to use. Do not use any
component that appears damaged.
•
For unit to function, please make sure battery is
installed and all cables are properly connected.
•
Make sure to disconnect thermistor cable after use
to avoid depleting battery as device 'turns on' when
thermistor/patient temperature cable is connected.
•
Only change battery when device is not connected
to patient.
•
Remove battery from device if not likely to be used
for more than 6 months.
•
Avoid movement of console when device is
connected to minimize loads on connecting cables.
• Avoid contact with ionic or corrosive fl uids.
U.S. Federal law restricts this device to sale on or by
the order of a physician.
Copyright © 2021 ZOLL Medical Corporation. All
rights reserved. ZOLL
or registered trademarks of ZOLL Medical Corpora-
tion and/or its subsidiaries in the United States and/or
other countries. All other trademarks are the property
of their respective owners.
2
®
must be used with a
, CoolRepeat
are trademarks
®
®
Graphic Symbols for Medical Device Labeling
Attention: See Instructions for Use
N
Date of Manufacture
M
Manufacturer
LATEX
Does not contain natural rubber latex
Separate Collection for Electrical and Electronic
Equipment
Do not use if box is damaged
Keep Away From Heat
Store in a Cool Dry Place
Type CF, Defi brillation Proof, Applied Part
Direct Current
Recyclable Paper Product
60°C
l
Temperature Limitation
-20°C
Type B Equipment
U.S. Federal law restricts this device to sale by
or on the order of a physician
1
QTY
Quantity
Instructions for Use
3