Download Print this page

Tailfin X Series Assembly Instructions

X & S series rack assembly

Tailfin 2019 Assembly Instructions

Table of Contents

Need help?

Do you have a question about the X Series and is the answer not in the manual?

Page 2 1. Unpack the Arch, 2. Add the washers to the 3. Check orientation 4. Whilst pushing screws & the Dropouts screws of dropouts and upwards, tighten the screws to arch four screws to 5Nm Tailfin 2019 Assembly Instructions © TAILFIN 2019...
Page 3 1. Unpack the top stay and the arch 2. Ensure the lock rings 3. Gently separate the top are rotated up, and out stay and work it carefully of the way over the upper arch pivots Tailfin 2019 Assembly Instructions © TAILFIN 2019...
Page 4 Step 2b – Attach top stay to arch 4. Make sure the top stay is fully on 5. Using a flat head of a screw driver, press the locking rings down, until they lock in position Tailfin 2019 Assembly Instructions © TAILFIN 2019...

S series