Download Print this page

Advertisement

Quick Links

AeroPack Carbon & Alloy assembly
Tailfin 2020 Assembly Instructions
© TAILFIN 2020
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Direct X Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Tailfin Direct X Series

  • Page 1 AeroPack Carbon & Alloy assembly Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 2 2. Check orientation 4. Whilst pushing 3. Check sloped screws & the Dropouts assembled of dropouts and upwards, tighten the surface is on the four screws to 5Nm screw to arch outside edge Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 3 3. When installed they 2. These can be screwed to supplied with 2 optional prevent the quick release the quick-release security screws and a mechanism from being mechanism as shown security Torx tool opened easily Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 4 5 Nm 2. Work both sides of the rear connector 3. Join both sides of the connector then 1. Unpack the rear to this position add screw and tighten to 5Nm connector and arch Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 5 2 PLACES 1. Unpack front connector, 2x screws & seatpost 2. Screw seatpost connector in position – make sure connector that the front strap is UNDER the seatpost connector – tighten screws to 5Nm Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 6 Step 4 – Assemble arch to bag 5 Nm 2 PLACES 1. Ready the arch, bag and 2. Attach rack to bag and tighten 2x screws to 2x screws Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 7 Direct X & S series frame mounting Parts included in the box as standard Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 8 2. Depending on the width of your dropouts with every arch includes: will determine how many spacers are 4x 7mm Thick Spacers required to fit the rack 2x M5 Washers 2x M5x16 Screws 2x M5x20 Screws 2x M5x30 Screws Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 9 • Max Dropout Width = 191mm • Max Dropout Width = 177mm • Max Dropout Width = 163mm • Min Dropout Width = 177mm • Min Dropout Width = 163mm • Min Dropout Width = 149mm Tailfin 2020 Assembly Instructions © TAILFIN 2020...
  • Page 10 Step 3 – Screw rack in place Insert correct number of spacers and screw directly to the frame Tailfin 2020 Assembly Instructions © TAILFIN 2020...

This manual is also suitable for:

Direct s seriesAeropack carbonAeropack alloy