Table of Contents
Advertisement
(3) If multiple LED controllers are used, select the number of the connected LED controllers.
Since only one controller is used in this example, it is not necessary to set "Sending Card Number" (e).
(4) Configure the connection.
(4)-1 Connecting from bottom to top using multiple ports
The system is connected to port 1 of the LED controller.
Select "1" (port 1) under "Ethernet Port No." (f).
Select the cabinet at the bottom left with the mouse, and then select the other cabinets up to the top
cabinet.
Then select Port2 and select the cabinets from the bottom to the top as you did for Port1.
English - 34
Hide quick links:
Advertisement
Table of Contents
