Table of Contents
Advertisement
Use a Hex-head screwdriver to remove two screws
for unlocking the D-Sub connector.
(No.1~2 screws size=M3x8, Torque=6±0.5kgfxcm)
S14
Use a Philips-head screwdriver to remove
screws for unlocking the AC power outlet.
( No.3~4 screw size=M3x8, Torque=6~7kgfxcm)
2
Remove the Mylar from the hooks of the bracket.
Use a Philips-head screwdriver to remove six screws
for unlocking the circuit board, release all the cables
S16
from the hooks.
(No.1~5 screw size=M3x7.5, Torque=6±0.5kgfxcm;
No. 6 screw size=M4x8, Torque=6±0.5kgfxcm)
2
Remove the interface board and power board from
S17
the bracket chassis module carefully, and disconnect
all the cables.
5. Disassembly and Assembly Procedures
two
1
3
4
3
4
5
6
1
Advertisement
Table of Contents
