Use a proper tool to release the function key cable
S8
from the connector, then pull the function key cable
high for releasing the function key cable.
Use a Philips-head screwdriver to remove 2pcs
screws for unlocking the bracket with the panel.
S9
Push the earing-lock, and disconnect the LVDS
cable from the connector of LCD panel module.
(No.1~2 screw size=M3x2.8, Torque=4~5kgfxcm)
Use a Philips-head screwdriver to remove 13pcs
screws for unlocking the middle bezel with the unit.
S10
(No.1~11 screw size=M3x4, Torque=3~4kgfxcm;
No.12~13 screw size=M1.6x1.7, Torque=0.6~1kgfxcm)
2
4
8
6
10
12
Take away the
middle bezel then
S11
screwdriver to remove 3pcs screws for unlocking the
function key board with the middle bezel
5. Disassembly and Assembly Procedures
1
2
1
5
3
9
7
11
13
use a Philips-head
.
3
Lift up the panel module for releasing the front bezel
S12
away from the panel module.
Take away the bracket chassis module and then put
S13
the bracket chassis module on a protective cushion.
2
1