Recorder - BenQ Z2 User Manual

Auto scanning for a channel
Push and hold the Joystick to the right or left for two seconds and
the phone will start the auto scan to locate an available channel.
Presetting a channel
When a preferred channel is located, press
select Save to save this channel to the My Channels list.
Listening to a preset channel
There are two ways to listen to a preset channel:
1. From the FM Radio screen, push the Joystick up or down to
locate a preset channel.
2. Press
your preferred channel and then press the Joystick button (OK).
Listening to the Radio using the Loud Speaker
Press (Option) and then select Loud Speaker.
The handsfree headset must remain connected to the phone
even if the Loud Speaker is turned on.

Recorder

For information on using the Recorder function, see page 41, "Using the
Recorder Function".
(Option) and then select My Channels. Scroll to
(Option) and
Menus 91