Advertisement
Available languages
Available languages
Blender Tips
Blender Jar Tips
• ALWAYS place liquid in blender jar first, then remaining ingredients.
• For best performance, minimum amount of liquid needed per
recipe is 1 cup (8 ounces/237 ml). Add more liquid if food is not
blending properly. The amount of liquid needed will vary based
on other ingredients required for blending.
• If blending action stops during blending or ingredients stick to
sides of jar, stop blending and try pulsing or add more liquid to
blender jar.
• Do not store food or liquids in blender jar.
Personal Jar Tips
• If blending action does not start, stops during blending, or
ingredients stick to sides of the jar, press CANCEL (
)
button.
Remove jar, shake contents, and return to blending.
• For best performance in the 20-oz. (590-ml) personal jar, minimum
amount of liquid needed per recipe is 3/4 cup (6 ounces/177 ml).
• When filling jar, place frozen ingredients or ice into jar first. When
turned upside down to blend, frozen items will be on top.
12
• Avoid bumping or dropping blender when in operation or at any
time.
• Cutting large whole fruits and vegetables may allow them to blend
more quickly.
• Do not fill blender jar past highest graduation marking.
• If ice or frozen fruit pieces are not blending, stop blender and pulse
a few times.
• Do not allow ice to stand or freeze in jar. Immediately crush ice
after placing in jar.
• Keep lid on for easy pouring.
• Do not chop or process hard foods such as ice cubes, cheese,
crackers, or meat as individual ingredients.
• Avoid bumping or dropping blender.
• Do not blend hot liquids in personal jar.
• Do not fill personal jar above MAX fill line.
How to Remove and Replace Quiet Shield
1. TO REMOVE: Start with front
2. Press tabs on both sides of
shield; separate front shield
the blender while moving
from back at rubber hinges.
back shield back with your
thumbs.
1. TO REPLACE: Press both
2. To secure, press back shield
shield locking buttons in
and blender base together.
while sliding back shield
around the base.
3. Slide back shield away from
blender base.
3. Pull front shield around rear
4. Secure round hinges of front
shield.
shield around rubber hinges.
13
Advertisement
