Advertisement
Available languages
Available languages
Using Manual Mode
1. Select speed and push
2. Press a different speed button
button.
during blending to increase
or decrease blending speed.
If using PULSE ( ), blender
will run at the high speed only
when PULSE ( ) button is
held down.
5. Lift Quiet Shield.
6. Remove blender jar.
10
3. At end of blending cycle,
4.
WARNING
Burn Hazard.
)
Do not fill blender jar with hot
press CANCEL (
button
liquid beyond the 3-cup (710-
to stop blending. Turn off
ml) level. Start blending at
blender with ON (I)/OFF ( )
lowest speed.
switch on right side of base.
Unplug blender from power
supply.
WARNING
Burn Hazard.
Metal parts
under blending
jar get hot after
extended use.
7. Pour with lid on.
Using Personal Jar
WARNING
Burn Hazard.
Do not blend hot ingredients.
Pressure may build, causing jar
to pop off and hot ingredients to
erupt.
WARNING
Laceration Hazard.
Handle blade carefully; it is very
sharp. Make sure unit is turned
OFF ( ) and is unplugged.
1. Add ingredients. Carefully
place cutting blade assembly
and collar onto personal jar.
4. Unplug. Turn off blender with ON
5. Hand-tighten drinking lid onto
(I)/OFF ( ) switch on right side of
personal jar.
base. Lift Quiet Shield. Remove
personal jar from base. Turn
bottom up; remove collar and
cutting blade assembly from jar.
(optional)
2. Turn personal jar upside
3. Close Quiet Shield and plug
down and shake. Place onto
blender into outlet. Press
base.
ON (I)/OFF ( ) switch to turn
on power to blender. Push
desired speed button. When
using PULSE ( ) button, the
blender will only run when
PULSE ( ) button is held
down. Press CANCEL ( )
button to stop blending.
11
Advertisement
