Advertisement
Available languages
Available languages
Parts and Features
Model: 53602-SAU
Type: B91
Ratings:
220–240 V~ 50–60 Hz 400 W
Two-Piece Removable
Quiet Shield
CONTROL PANEL
PULSE
CANCEL
SMOOTHIE
Sound-Absorbing Jar Pad
ICE CRUSH
Shield Locking Button
CLEAN
PULSE
CANCEL
6
BEFORE FIRST USE: After unpacking blender, wash everything except blender
base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp
cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken
when cleaning inside of blender jar as cutting blade assembly is very sharp.
Vent
Pour Spout
Lid
Glass Blender Jar
Handle
Cutting Blade
Assembly
Jar Collar
Shield Locking Button
Base
ON (I)/OFF ( ) (Power) Switch
5 Speed Buttons
Button
Program Buttons
Button
Parts and Features
Lid: The lid is easy to put on, take off, and clean. Always use lid when
machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON (I)/OFF ( ) (Power) Switch: The ON (I)/OFF ( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
Personal Blender Jar
(optional accessory
Program Buttons: There are three program settings:
SMOOTHIE ( ), ICE CRUSH ( ), and CLEAN (
on select models)
Select desired program by pressing button for that
program.
Drinking Lid
5 Speed Buttons: Five speeds start at low and increase to high.
PULSE (
) Button: Press and hold down PULSE
button to blend at high speed setting.
)
CANCEL (
Button: Stops blender at any time.
20-oz.
Quiet Shield: The Quiet Shield reduces amount of
(600 ml)
noise from your blender. When placed over blender
Personal
jar, it muffles sound that your blender produces.
Jar
Personal Blender Jar: The personal blender jar makes it easier to
make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
(cont.)
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 12.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
).
our customer care center to obtain replacement parts.
Selecting Blender Settings: Select from three program settings or
five speed buttons from low to high (
WARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.
).
7
Advertisement
